Increasing strength – RTC-600

Experience the RTC-600, one of AAEON’s rugged tablet computers that convinces through its reliable performance at all times!

RTC-600.png
RTC-600 by AAEON – Maximum Performance @ Minimal Size

The RTC-600A will prove itself a worthy companion at your side at all times and through all kinds of circumstances, defying water, dust, sand, snow and mud during your intensive day at the job. Dropping it will not give you the terror shock-and-awe you normally have when dropping your consumer-grade tablet/phablet. Additionally, with the IP67 certification there’s no need to worry about the extremities of the environment!

You need visible proof? This time, AAEON is going one step further to demonstrate the reliability of RTC-600, see for yourself:

Connectivity

Data transfer and positioning is crucial for your day in the field. The RTC-600A is equipped with WiFi, BlueTooth, GPS/GLONASS and 3G/LTE to ensure accurate positioning and fast data response, whether in a car, bus, truck or even harvester. The docking station will even provide extra (back-up) connectivity through physical Ethernet.

Data-Capture

Next to the NFC/Mifare RFID reader, the optionally integrated solid-state 1D/2D barcode reader will read a wide variation of barcodes for all your tracking & tracing needs, whether in delivering packages, monitoring machine maintenance or taking stock in your warehouse. It reads the most popular used barcodes from 1D EAN/UPC to 2D DataMatrix codes.

Furthermore, the 8MP auto-focus camera with flash will create the right picture for you in any environment, whether you are documenting damage to goods upon delivery or making scenery pictures for your field surveying goals. The hot-swappable battery will give you the flexibility to work some extra hours past the obligatory 8-hour work-day.

Expandability

The RTC-600A is a very versatile unit offering the flexibility to scale your needs with different accessories.

Running out of battery power? No worries, the hot-swappable battery can be exchanged in seconds and fits nicely in the 4-battery charging station to recharge in just a couple of hours.

If you want to wear the RTC-600A on your body at all times, the carry bag with integrated hand strap (auto-adjust to all size hands) will just do the trick for you.

Furthermore, the docking station will give you the capability to charge the RTC-600A and, through the extra USB ports, add extra peripherals to it, such as a keyboard/pad, UHF RFID reader, forklift sensor, etc. The docking station also provides for physical Ethernet and a COM port for legacy devices.

Advertisements

AAEON launches BOXER-6839 embedded Box PC

AAEON proudly presents a new computing solution for Industry 4.0 – the BOXER-6839 – an embedded PC for Vision Systems.

BOXER - 6839 (2)
BOXER-6839 embedded PC by AAEON

The special design of the interface facilitates  PCIe x4, while integrating a variety of cameras such as GigaLAN / PoE / USB 3.0 / CameraLink / CoaXpress. Hereby, the compatibility with most industrial cameras and vision control softwares was tested and proven, ensuring the continuous improvement of known industry standards. Powered by the Intel 7th Gen. desktop CPU and Intel I210 LAN chip, the BOXER 6839 is designed to expedite the assembly process.

Unlike former designs, the BOXER 6839 features a lid cover to pre-empt accessibility. It features a CPU socket, which supports exchangeable CPUs, offering higher customization and mobility options. Meanwhile, it provides a triple independent display, which will greatly enhance factory product management. Additionally, it offers support for 6 COM RS-232/422/485 ports, well above the current market average.

Designed to consolidate existing camera systems, AAEON’s BOXER-6839 series supports various camera interfaces, providing integration without having to connect through other transponders. The BOXER 6839 provides longevity support and a customizable mechanical design for CPU flexibility to meet the ever-changing needs of both the client and the landscape of Industry 4.0. With a native capacity of 3 GigaLAN ports, as well as a 6 USB 3.0 sockets and 34-bit programmable digital I/O, it can also be adapted for a range of industrial manufacturing processes. The chassis design is an option for smart control systems, machine vision inspection, digital signage, surveillance and machine makers.

Boxer 6839
BOXER-6839 – Interface Compatibility

For the detailed Product Datasheet, please click here.

PICO-APL1: Ideal for integration in vertical IIoT markets

AAEON presents the PICO-APL1 single board computer (SBC) featuring a compact, slim design, fanless operation and a wide thermal operating envelope. The PICO-APL1 retains its ever-popular IO, ensuring easy upgrades or replacements. The PICO-APL1 is available in two SKUs based on the Intel® Atom™ N4200 and N3350. The Intel® Atom™ is a proven processor delivering impressive performance, energy efficiency, and low power consumption. Support for up to 8GB DDR3, with SATA 3.0, mSATA, and MiniCard expansion slots and a configurable BIO connection for daughter boards, allows for a huge range of expansion opportunities. The PICO-APL1 is designed to integrate perfectly with the AAEON EZ-Way “slot in, snap together” system, enabling rapid deployment and access to all internal components, thus lowering costs and further enhancing ROI.

 

 

    Vertical IIoT Deployment Applications

 

 

 

secure, islolated communication

Secure, isolated communication

Optional COM, LAN, and DIO isolation ensure the PICO-APL1 is ideal for verticals requiring secure communication such as Automotive, Healthcare and Pharmaceutical Manufacturing.

 

robotics

                                                                          Robotics

The PICO-APL1 is ideal for IoT, and IIoT implementations, including Smart Factory, Smart City and Industry 4.0. The rapidly growing interest in Smart Factories and Industry 4.0 will greatly benefit Machine Vision and Automatic Optical Inspection, increasing reliability and ROI.

 

retail

                                                                            Retail

The discreet PICO-APL1 is well suited for retail deployment. Dual channel LVDS provides full support for triple displays, including 4K x 2K HDMI or DP, ideal for Digital Signage. The impressive IO options of the PICO-APL1 include 3G/4G, BT and Wi-Fi for POS deployment scenarios, where telemetry and continuous data capture are highly desirable.

 

To download PICO- APL1 Datasheet click here

Mobile 3D box dimensioning is finally here!

written by: Pascal Borgstijn, Business Development Manager @ AAEON Europe

Imagine you no longer need to tape measure boxes anymore,

you just let the mobile computer tell you what the dimensions are in addition to the traditional handling it will do for you such as scanning the barcode and uploading the information in real-time.

The cost benefits of the new AAEON 7” RTC-700B with Intel® RealSense™ 3D camera are clear:

  • No more tape-measuring which costs a lot of time;
  • No more “guesswork” to counter the time restraint of tape measuring and thus losing revenue e.g. by shipping a box bigger than invoiced to the receiver;
  • Clarify early in the packing area if the packaged load will still fit in the designated truck eliminating unnecessary trips to the wrong loading dock;
  • No need for large and expensive dimensioning machines with limited flexibility, just a Bluetooth/Wi-Fi enabled scale at a fraction of the costs (if you need to weigh at all).

Check out the video below and let us know how we can help you improve your logistics workflow:

https://youtu.be/1tIxTtZsiH8

 

For more info on our full Rugged Tablet portfolio, please go to www.rtc-tablet.com

Visit us at Embedded World in March 2017

Once again in 2017 – from 14 – 16 March – Embedded World , the leading international fair for embedded systems in Nuremberg, will be the place to be when it’s all about the following themes: security for electronic systems, distributed intelligence, the Internet of Things, e-mobility, energy efficiency and much more. Here, with around 1,000 expected exhibitors, you will find the world’s largest range across the embedded systems value-added chain and we are there!

Tradeshow Information

Venue:   Exhibition Center Nuremberg, Nuremberg, Germany

Date:     March 14-16, 2017

AAEON Booth:  1-310

 

Press Conference Information

Date:     March 15, 2017

Time:    12:00 – 13:00

Venue:   Room Hong Kong, NCC East, 2ed Floor, Messezentrum Nuremberg

Speaker: Fabrizio Del Maffeo
Topic: UP Bridge The Gap: The Embedded & Innovators Platform
 During the press conference, Fabrizio Del Maffeo, Managing Director of AAEON Europe and Founder of UP Bridge the Gap, will introduce UP product family. 
(UP, UP2  and evolutions), its ecosystem and the value of UP platform for the embedded developers, the professional makers and the innovators.

 

Forum I Information

Date:     March 14, 2017

Time:    14.00 -14.30

Venue:   Hall 3A, Booth 3A-511

Speaker: Fabrizio Del Maffeo

Topic:  UP – The IoT Embedded Platform for Industrial Makers and Innovators
UP is a unique platform for Industrial makers and Innovators.
The boards, the community, the ecosystem and the shop give to user a powerful environment to share, create, produce and sell their solutions.
During the presentation we also give an overview to UP product family from the first generation based on Intel Cherry Trail – UP Board – to the latest version – UP Squared –based on Intel Apollo Lake and MAX 10 Intel FPGA (formerly Altera).

 

Forum II Information

Date:     March 15, 2017

Time:    11:30 – 12:00

Venue:  Hall 4, Booth 4-422

Speaker: Marco Barbato & Nico Schuster
Topic:  Off-the-Shelf Embedded Computers Vs Customized Embedded Computers: How to chose
We will give you a quick overview of most common form factor, from single board computers to computers-on-module, show the development process and cost for x86 customized solution and finally the most common criteria to select between standard single board computer, modular computer, semi-customized, customized computer for your application.

 

We hereby warmly invite you to a free visit. Simply use the eCode

* Redeem voucher Link :    click here

* Voucher Code:     B344366

We are delighted to present to you our latest products, technologies and services. We will be pleased to take the time to provide you with comprehensive advices.

We are looking forward to your visit!

With best regards

AAEON Europe Team

 

Can a Rugged Tablet survive an avalanche?

Write: Pascal Borgstijn, Business Development Manager Europe for Rugged Tablets

img_0352

Last week we at AAEON Europe had our annual Channel Partner Conference. It was held in Chamonix-Mont-Blanc in France, and it is a mesmerizing place. Next, to the productive meetings in the morning done by ourselves as well as some of our Ecosystem partners, there was a time in the afternoon and evening for fun activities, drinks, and great food.

Being responsible for the RTC Rugged Tablet product portfolio, I thought this would be an ideal location to put our latest addition, the 11.6″ RTC-1200SK, to a real test. The first day of activities we were quite high up (approx 1,400 meters) and it was blistering cold (at least -12°C). Everybody suited up for the occasion and were good sports about it.

Due to the cold, not a lot of people were able to take pictures with their smartphones as these just died…

To prove a point about the ruggedness of our tablets, I was brave enough to give the RTC-1200SK an active part in an activity called “Avalanche Rescue”.

Did the RTC-1200SK pass the test? See for yourself:

 

 

New RTC-1200 series most complete yet

rtc-1200-1-570x342

AAEON’s new RTC-1200SK series, 11.6″ (Windows 10) rugged tablet computer will give you the power and functionality of a full panel PC or HMI but then in a mobile way:

  • Up to 1000 nits full sunlight readable display
  • 1D/2D Barcode Scanner
  • NFC reader
  • 1 x COM &  1 x Ethernet port
  • 3 x full-size USB ports (of which on is USB 3.0)
  • 1 x HDMI
  • Integrated hand strap and shoulder strap
  • Kensington lock
  • 2 x Hot-swappable batteries
  • Intelligent multi-charging station for up to 4 of the hot-swappable batteries
  • Vehicle docking station offering wide-input voltage charging, 4 x USB, 1 x Gigabit Ethernet, 1 x COM-port and two pass-through antenna connectors for GNSS and WWAN

The RTC-1200SK is a true mobile HMI, with its’ various I/O’s and designed to be customized to the customers’ exact needs.

Some example applications:

  • Use it as a true Mobile HMI / Mobile Panel PC on the factory floor or offshore site by utilizing the up to COM, Ethernet & full-size USB options;
  • Pinching your eyes when working with your traditional mobile computer in your construction needs looking at a small screen? Explore and amend your construction blueprints on-site using the most of the 11.6″ fully sunlight readable display;
  • Log in via NFC and make your rounds as a field service engineer in sunshine, rain, and snow profiting from the IP65 rating and its’ wide temperature capability even using your gloves utilizing the “Rain/Glove mode”;
  • Use it as a Vehicle PC in Heavy machines such as excavators, shovels or dozers;
  • Mount it on your forklift for your intralogistics purposes;
  • It will not protect you against a bullet in law enforcement, but you don’t have to think twice dropping the RTC-700 in the case of an emergency.

Interested? Contact us today or request a demo via one of our partners (all RTC models).

rtc-1000_1